1 / 2
ASI M Series Metal Bonding Cyanoacrylate Super Glue
About the ASI M Series Metal Bonding Cyanoacrylate Super Glue
The Adhesive Systems Inc (ASI) M Series cyanoacrylate super glue was formulated for bonding metal to itself or metal to other substrates. It comes in a wide range of viscosities (thicknesses) and cures very quickly with a strong, permanent bond.
Benefits of the ASI M Series Cyanoacrylates
- Great for bonding metal to metal
- Great for bonding metal to other substrates
- Single component (no mixing or nozzles required)
- Cures at room temperature
- Good for bonding most substrates
- Fast cure time
- Dispensing can be automated
- Long term bonds
- Economical
- Meets most military (MilSpec) standards
- Can replace heavy mechanical fasteners
The ASI M Series Cyanoacrylates Bond:
- ABS NBR
- Acrylic Neoprene
- Aluminum Nitrile
- Bakelite Nylon
- Brass Phenolic
- Chloroprene Polycarbonate
- Chrome Polyester
- Cooper Polystyrene
- EPDM Porcelain
- Fiberglass PVC
- Latex SBR
- Leather Steel
- Natural Rubber Valox
- Wood
Compare ASI M 100 to
- 3 BOND™ 1703
- ARON ALPHA™ 102
- CHEMENCE™ MC 100
- HENKEL™ 7000
- HERNON™ 110
- LOCTITE™ 496
- LORD™ GM
- PACER™ M -100
- PERMABOND™ 910
Compare ASI M 1000 to
- CHEMENCE™ MC 1500
- HENKEL™ 99
- LOCTITE™ 415
- LORD™ M
- PERMABOND™ 130
* The product names used in this website are for identification purposes only.
* All trademarks and registered trademarks are the property of their respective owners.
ASI M Series Cyanoacrylate Super Glue Specifications
- Color: Opaque/Slight Amber
- Viscosity: 5 cps
- Specific Gravity: 1.07
- Base: Methyl
ASI M Series Chemical and Solvent Resistance
Percent of Strength Retained After Aging for 500 Hours
- GASOLINE @ 220C: 100%
- ISOPROPANOL @ 220C: 100%
- ETHANOL @ 220C: 1005
- FREON TA @ 220C% 100%
- MOTOR OIL @ 400C% 100%
- POLYCARBONATE 400C @ 95% RH 100%
ASI M Series Cure Time and Bond Strength By Substrate
- Steel < 10 Seconds > 2100 psi
- Aluminum < 10 Seconds > 1750 psi
- Neoprene < 5 Seconds > 750 psi
- ABS < 7 Seconds > 900 psi
- PVC < 5 Seconds > 900 psi
- Polycarbonate < 7 Seconds > 900 psi
- Phenolic < 7 Seconds > 850 psi
ASI M Series Specifications by Viscosity
| PRODUCT | GAP FILL | VISCOSITY | STRENGTH | TEMP RANGE | CURE SPEED (FIXTURE/FULL) | MIL SPEC A 46050C |
| M 5 | 0.002 | 5 cps | 2800/4000 | -85 to +200° F | <5 Sec/8 Hours | Type I, Class 1 |
| M 60 | 0.004 | 60 cps | 2800/4000 | -85 to +200° F | <8 Sec/8 Hours | Type I, Class 2 |
| M 100 | 0.006 | 100 cps | 2800/4000 | -85 to +200° F | <10 Sec/8 Hours | Type I, Class 2 |
| M 1000 | 0.008 | 1,000 cps | 2800/4000 | -85 to +200° F | <10 Sec/8 Hours | Type II, Class 3 |
ASI M Series Cyanoacrylate Data Sheets
ASI M Series Technical Data Sheets
ASI M Series Material Safety Data Sheet
About the ASI M Series Metal Bonding Cyanoacrylate Super Glue
The Adhesive Systems Inc (ASI) M Series cyanoacrylate super glue was formulated for bonding metal to itself or metal to other substrates. It comes in a wide range of viscosities (thicknesses) and cures very quickly with a strong, permanent bond.
Benefits of the ASI M Series Cyanoacrylates
- Great for bonding metal to metal
- Great for bonding metal to other substrates
- Single component (no mixing or nozzles required)
- Cures at room temperature
- Good for bonding most substrates
- Fast cure time
- Dispensing can be automated
- Long term bonds
- Economical
- Meets most military (MilSpec) standards
- Can replace heavy mechanical fasteners
The ASI M Series Cyanoacrylates Bond:
- ABS NBR
- Acrylic Neoprene
- Aluminum Nitrile
- Bakelite Nylon
- Brass Phenolic
- Chloroprene Polycarbonate
- Chrome Polyester
- Cooper Polystyrene
- EPDM Porcelain
- Fiberglass PVC
- Latex SBR
- Leather Steel
- Natural Rubber Valox
- Wood
Compare ASI M 100 to
- 3 BOND™ 1703
- ARON ALPHA™ 102
- CHEMENCE™ MC 100
- HENKEL™ 7000
- HERNON™ 110
- LOCTITE™ 496
- LORD™ GM
- PACER™ M -100
- PERMABOND™ 910
Compare ASI M 1000 to
- CHEMENCE™ MC 1500
- HENKEL™ 99
- LOCTITE™ 415
- LORD™ M
- PERMABOND™ 130
* The product names used in this website are for identification purposes only.
* All trademarks and registered trademarks are the property of their respective owners.
ASI M Series Cyanoacrylate Super Glue Specifications
- Color: Opaque/Slight Amber
- Viscosity: 5 cps
- Specific Gravity: 1.07
- Base: Methyl
ASI M Series Chemical and Solvent Resistance
Percent of Strength Retained After Aging for 500 Hours
- GASOLINE @ 220C: 100%
- ISOPROPANOL @ 220C: 100%
- ETHANOL @ 220C: 1005
- FREON TA @ 220C% 100%
- MOTOR OIL @ 400C% 100%
- POLYCARBONATE 400C @ 95% RH 100%
ASI M Series Cure Time and Bond Strength By Substrate
- Steel < 10 Seconds > 2100 psi
- Aluminum < 10 Seconds > 1750 psi
- Neoprene < 5 Seconds > 750 psi
- ABS < 7 Seconds > 900 psi
- PVC < 5 Seconds > 900 psi
- Polycarbonate < 7 Seconds > 900 psi
- Phenolic < 7 Seconds > 850 psi
ASI M Series Specifications by Viscosity
| PRODUCT | GAP FILL | VISCOSITY | STRENGTH | TEMP RANGE | CURE SPEED (FIXTURE/FULL) | MIL SPEC A 46050C |
| M 5 | 0.002 | 5 cps | 2800/4000 | -85 to +200° F | <5 Sec/8 Hours | Type I, Class 1 |
| M 60 | 0.004 | 60 cps | 2800/4000 | -85 to +200° F | <8 Sec/8 Hours | Type I, Class 2 |
| M 100 | 0.006 | 100 cps | 2800/4000 | -85 to +200° F | <10 Sec/8 Hours | Type I, Class 2 |
| M 1000 | 0.008 | 1,000 cps | 2800/4000 | -85 to +200° F | <10 Sec/8 Hours | Type II, Class 3 |
ASI M Series Cyanoacrylate Data Sheets
ASI M Series Technical Data Sheets
ASI M Series Material Safety Data Sheet
Select Choose Viscosity
Select Choose Size
From $46.20
Original: $154.00
-70%ASI M Series Metal Bonding Cyanoacrylate Super Glue—
$154.00
$46.20Description
About the ASI M Series Metal Bonding Cyanoacrylate Super Glue
The Adhesive Systems Inc (ASI) M Series cyanoacrylate super glue was formulated for bonding metal to itself or metal to other substrates. It comes in a wide range of viscosities (thicknesses) and cures very quickly with a strong, permanent bond.
Benefits of the ASI M Series Cyanoacrylates
- Great for bonding metal to metal
- Great for bonding metal to other substrates
- Single component (no mixing or nozzles required)
- Cures at room temperature
- Good for bonding most substrates
- Fast cure time
- Dispensing can be automated
- Long term bonds
- Economical
- Meets most military (MilSpec) standards
- Can replace heavy mechanical fasteners
The ASI M Series Cyanoacrylates Bond:
- ABS NBR
- Acrylic Neoprene
- Aluminum Nitrile
- Bakelite Nylon
- Brass Phenolic
- Chloroprene Polycarbonate
- Chrome Polyester
- Cooper Polystyrene
- EPDM Porcelain
- Fiberglass PVC
- Latex SBR
- Leather Steel
- Natural Rubber Valox
- Wood
Compare ASI M 100 to
- 3 BOND™ 1703
- ARON ALPHA™ 102
- CHEMENCE™ MC 100
- HENKEL™ 7000
- HERNON™ 110
- LOCTITE™ 496
- LORD™ GM
- PACER™ M -100
- PERMABOND™ 910
Compare ASI M 1000 to
- CHEMENCE™ MC 1500
- HENKEL™ 99
- LOCTITE™ 415
- LORD™ M
- PERMABOND™ 130
* The product names used in this website are for identification purposes only.
* All trademarks and registered trademarks are the property of their respective owners.
ASI M Series Cyanoacrylate Super Glue Specifications
- Color: Opaque/Slight Amber
- Viscosity: 5 cps
- Specific Gravity: 1.07
- Base: Methyl
ASI M Series Chemical and Solvent Resistance
Percent of Strength Retained After Aging for 500 Hours
- GASOLINE @ 220C: 100%
- ISOPROPANOL @ 220C: 100%
- ETHANOL @ 220C: 1005
- FREON TA @ 220C% 100%
- MOTOR OIL @ 400C% 100%
- POLYCARBONATE 400C @ 95% RH 100%
ASI M Series Cure Time and Bond Strength By Substrate
- Steel < 10 Seconds > 2100 psi
- Aluminum < 10 Seconds > 1750 psi
- Neoprene < 5 Seconds > 750 psi
- ABS < 7 Seconds > 900 psi
- PVC < 5 Seconds > 900 psi
- Polycarbonate < 7 Seconds > 900 psi
- Phenolic < 7 Seconds > 850 psi
ASI M Series Specifications by Viscosity
| PRODUCT | GAP FILL | VISCOSITY | STRENGTH | TEMP RANGE | CURE SPEED (FIXTURE/FULL) | MIL SPEC A 46050C |
| M 5 | 0.002 | 5 cps | 2800/4000 | -85 to +200° F | <5 Sec/8 Hours | Type I, Class 1 |
| M 60 | 0.004 | 60 cps | 2800/4000 | -85 to +200° F | <8 Sec/8 Hours | Type I, Class 2 |
| M 100 | 0.006 | 100 cps | 2800/4000 | -85 to +200° F | <10 Sec/8 Hours | Type I, Class 2 |
| M 1000 | 0.008 | 1,000 cps | 2800/4000 | -85 to +200° F | <10 Sec/8 Hours | Type II, Class 3 |
